3D printable Windturbine/Waterturbine

3D printable Windturbine/Waterturbine

Hello and Welcome :)

With this data package you’ll get the 3d files to print a Turbine as seen in my YouTube video: https://youtu.be/kQswSftr9UE . There are four files (wing, arm, hub_a, hub_b) in two formats (.obj, .stl) The parts are prepared to be printed on a small 3D printer like the Micro3D considering a build volume of 100 mm. To build a Windturbine like the one in the video you have to print the parts “wing” and “arm” six times, and the part “hub_a” once. The part “hub_b” is the same like “hub_a” except of the holes wich have a 30 degree offset. It can be used to print two or more of these turbines and attach them to each other with a 30 degree offset. If you print the parts unchanged, you’ll get a turbine wich is 530mm in diameter and weights only about 350 grams. Perfect for small wind-, and high torque water applications. Use bigger 3D printer and scale up the parts for bigger turbines. For example if you use the Ultimaker 2, wich has a build volume of about 220mm, you’ll get a very huge turbine with 1166mm in diameter. If you use Wind- or Solar for electricity, have some kind of filament maker like the redetec protocycler and feed it with waste plastic, you can make turbines virtually for FREE! Download, print and make ENERGY! :) THX!

by
by
by
by
by
by